|
|
| |
| |
|
 |
|
| |
 |
| |
|
|
| |
Model numbers
| Description |
Model number |
| HP DesignJet 755CM printer |
C3198A (E/A0 size) |
Printer description
The HP DesignJet 755CM printer is a large-format, color and monochrome, Inkjet printer that provides hardcopy output of computer program data.
Large-format plots of high resolution and quality are generated for applications such as:
-
Graphics
-
Design
-
Illustration
-
Desktop Publishing (poster-size)
-
Computer-aided design (CAD)
-
Computer-aided manufacturing (CAM)
-
Mapping
-
Mechanical and architectural drawings
-
General drafting
-
Large format printers markets
Graphic languages
The printer accepts data from graphics, CAD, and other software programs supporting the following languages:
-
Adobe (R) PostScript (R) Level 2.
-
Hewlett-Packard Graphics Language (HP-GL), a vector language.
-
HP-GL/2, an enhanced version of HP-GL.
-
Hewlett-Packard Raster Transfer Language (HP-RTL) a raster language.
-
Printer Job Language (PJL).
The printer supports HP-GL/2 with both the Roman and the Japanese Kanji character sets (provided the Kanji ROM SIMM is fitted).
Printer features
-
Support for glossy papers and films.
-
Improved print quality, including new print modes that help eliminate banding.
-
Better lightfastness, up to 1 year in typical office lighting.
-
More extensive color management software, including PANTONE (R)* profiles, ICC profiles for Apple ColorSync 2.0, Adobe ink profiles, and AGFA Fototune and Kodak Precision profiles.
-
Preinstalled memory, PostScript, and HP JetDirect card for Ethernet/LocalTalk.
-
Automatic media-edge sensing.
-
Automatic cartridge alignment, testing and servicing.
-
Built-in diagnostic and demonstration plots.
-
Automatic media stacking with adjustable media bin.
-
An automatic single-axis cutter.
-
Queuing, nesting and expanded margin capabilities.
-
Easy-to-read 2 x 30 vacuum fluorescent display (VFD).
| Media sizes |
Width (carriage axis) |
Length (paper axis) |
E/A0-size printer |
Minimum
210 mm (8.3 inches) |
Maximum
917 mm (36.1 inches) |
Minimum
210 mm (8.3 inches) |
Maximum
15.2 m (50 ft.) |
| Media types |
Monochrome
Opaque bond
Translucent bond
Natural tracing paper
Vellum
Coated paper
Matte film
Clear film
Heavy coated paper
High-gloss photo paper**
Semi-gloss photo paper**
High-gloss film** |
Color
Opaque bond (CAD drawings only)
Natural tracing paper*
Vellum*
Coated paper
Matte film
Clear film
Heavy coated paper
High-gloss photo paper**
Semi-gloss photo paper**
High-gloss film** |
| |
*CAD drawings only and HP media only.
**A monochrome drawing can be printed on glossy media, but all cartridges should be loaded. |
|
|
NOTE: |
See also Supplies Source catalog and (in Europe and U.S.) Media Reference Guide. From time to time, new media types may become available. For up-to-date information, please contact an HP dealer or local HP Sales and Support Office. |
Margins
Leading edge:
Trailing edge:
Sides: |
Normal
17 mm (0.67 inches)
17 mm (0.67 inches)
4 mm (0.2 inches) |
Smaller (roll media only)
10 mm (0.39 inches)
10 mm (0.39 inches)
5 mm (0.2 inches) |
| All measurements +/-2 mm (0.08 inches) |
|
|
Resolution
Color/Mono set to: Mono
Fast print quality: 300 x 300 dpi
Other print qualities: 600 x 600 dpi*
PostScript: 300 x 300 dpi |
Color/Mono set to: Color
All print qualities:
300 x 300 dpi but 600 x 600 dpi for black with HP RTL* |
|
NOTE: |
*Except for glossy media types, on which the resolution is always 300 dpi. |
| Accuracy (Maximum accumulated error) |
+/-0.38 mm (0.015 inch) or +/-0.2% of the specified vector length, whichever is greater, at 23 degrees C (73 degrees F), 50–60% relative humidity, on HP Matte Film. |
| Programming languages supported |
Adobe PostScript Level 2, HP-GL (7586B), HP-GL/2, HP RTL, PJL |
Media handling
The printers handle sheet media and roll media. Supported standard sizes are as follows:
| |
E/A0-size printers (C3196A) |
| ANSI |
A, B, C, D, E |
| ISO |
A4, A3, A2, A1, A0 |
| Metric Oversize |
A2, A1, A0 |
| Architectural |
C, D, E, E1 |
| JIS |
A4, A3, A2, A1, A0, B4, B3, B2, B1, B0 |
The printers handle media that does not exceed the following maximum and minimum:
| |
E-size |
| Min. width Sheet |
8.3 inches (210 mm)
A/A4-E/A0) |
Roll widths
Max. widths |
24 inches (61 cm) AND 36 inches (92 cm)
36.1 inches (917 mm) |
| Max. Sheet length |
expected to be 1.6 m |
| Long axis plotting available (maximum length 50 ft. (15.2m)). |
| The media margins define the real available plotting area on the media: |
Ink information
Black InkJet print cartridge
| 51645A |
Advanced pigmented ink
deep dark black ink
crisp sharp characters
fast dry time
optimized to prevent black to color bleed
Permanence
lightfastness
water resistance
highlighter type smear or blurred text
optimized to prevent black to color bleed |
Color InkJet print cartridge
| 51644C,M,Y Color |
Dye-based
More than 2X improvement in lightfastness over 51650C,M,Y.
Optimized with 51645A black ink to eliminate black to color bleed
High quality color CAD output on plain bond paper with a lower cost per page |
Memory information
The HP DesignJet 755CM printer has 71 MB of memory. It has 4 MB of standard on-board RAM, plus 3 additional MB used internally, as well as two pre-installed 32 MB SIMMs.
Performance
"Normal" printer use
"Normal" printer use means less than:
OR
If drawings are smaller than E/A0, the number of pages per day could be higher.
If the printer is being used less than this, it is unlikely it will need to be serviced. If the printer is being used more than this, it is possible that, after a time, it will need to be serviced. The printer itself keeps an internal count of total pages printed and total passes of the print cartridges. If the front panel periodically displays Status: Maintenance Advised, this means that the use of the printer has exceeded one of the following:
OR
Contact the local HP dealer or HP service engineer to arrange a service. After the service, the message will disappear. If the message is ignored, the printer may continue to be used as normal, but may meet a number of operational or print-quality problems.
The current count of the two statistics can be seen on the Service Configuration Plot.
To print the service configuration plot
-
Verify that media is loaded.
-
In the Full Menu mode choose Utilities.
-
Choose Service Config.
|
NOTE: |
The Service Configuration Plot or " Service config " was formerly known as the " Config plot " on the HP DesignJet 650C printers. |
Physical specifications
| |
Weight (packed) |
Length (unpacked) |
Depth (unpacked) |
Height (unpacked) |
With stand
E/A0-size printer |
61 kg (135 lb) |
1370 mm (54.0 inches) |
675 mm (26.6 inches) |
1200 mm (47.3 inches) |
| Without stand |
|
|
|
|
| E/A0-size printer |
43 kg (95 lb) |
|
|
|
Electrical specifications
| Source |
100–240V ac +/-10%. Autoranging |
| Frequency |
50 - 60 Hz |
| Power consumption |
140 W max. (2.0 A max.) |
| Energy Star rating (USA) |
Maximum power in idle state: 45 watts |
Environmental specifications
Operational
| Mechanical and electrical: |
0 to 5 degrees C (32 to 131 degrees F)
@ 5 - 95% relative humidity |
| With cartridges and media: |
15 to 35 degrees C (59 to 95 degrees F)
@ 20 - 80% relative humidity |
| For optimal print quality and media handling: |
15 to 30 degrees C (59 to 86 degrees F)
@ 20 - 80% relative humidity |
Storage
| Printer and Media |
–40 to 70 degrees C (–40 to 158 degrees F)
@ 20 - 80% relative humidity |
| Cartridges |
–40 to 60 degrees C (–40 to 140 degrees F)
@ 20 - 90% relative humidity |
|
| |
| |
